Englishहिन्दीHinglish
The Detailers The DetailersKota · Rajasthan

Services

Ceramic Wax & Paint Correction in Kota

Iron removal, tar removal, clay, sanding, heavy cut and finishing — the full swirl-removal job that puts the reflection back.

ServiceSmallAlto, Kwid, Santro, i10MediumSwift, Baleno, i20, DzireLargeCreta, Seltos, Scorpio, Fortuner
Ceramic Wax & Paint Correction₹4,000₹5,000₹6,000

All prices in Indian Rupees, inclusive of materials. Final quote confirmed after we inspect the paint.

A dual-action polisher working a red panel to remove swirl marks
Time at the studio1 day
WarrantyNot a coating — a correction
Done atSubhash Nagar II, Kota
Booking+91 99288 01695

Correction is what makes a coating look like anything

Paint correction is the stage most people do not see on a price list and most shops quietly skip. It is machine polishing that physically removes a few microns of clear coat to level out the scratches sitting in it. Those scratches are what scatter light and make dark paint look grey and flat. Our ceramic wax service is the full sequence: iron fallout removal, tar removal, clay decontamination, wet sanding where a defect needs it, a heavy cutting stage and then a refining stage to put the clarity back. Skip it and a coating just seals the damage in.

Where the swirl marks came from

Almost never from driving. Swirl marks come from washing — specifically from dragging dry, gritty dust across paint with a cloth or a sponge, or from an automatic brush wash. Kota makes this worse than most places because the dust here is coarse: monitored PM10 has run between 97 and 153 micrograms per cubic metre against a standard of 60, and the excess over PM2.5 is crustal and road dust, which is the abrasive fraction. Correcting the paint fixes the symptom. Changing how the car is washed is what stops it coming back.

What is included

  • Iron fallout and tar removal
  • Clay bar decontamination of every panel
  • Wet sanding where a defect calls for it
  • Heavy cut compounding stage
  • Refining polish to restore clarity
  • Protective wax layer to finish

Watch the process

How ceramic coating is applied at The Detailers, KotaWash and decontaminate · Cut the swirl marks out · Refine to a finish · Lay the coating · Cure, then inspect

Ceramic Wax & Paint Correction — questions

What is the difference between rubbing, polishing and ceramic wax?

Rubbing is an aggressive cut that removes a lot of clear coat quickly and leaves its own marks. Polishing is a finer stage that removes those marks. Our ceramic wax service is the whole controlled sequence — decontamination, cutting, refining and then protection — rather than one pass with a hard compound.

How much does paint correction cost in Kota?

₹4,000 for a small car, ₹5,000 for a medium and ₹6,000 for a large vehicle. If the car is going on to a ceramic or graphene coating, the correction is already part of that price.

Can polishing remove deep scratches?

If you can catch the scratch with a fingernail it has gone through the clear coat and polishing will not remove it — it can only soften the edges. Anything shallower than that usually comes out completely.

How many times can a car be polished?

Clear coat is finite, usually 40 to 60 microns on a factory finish, and each correction takes a few of them. Done properly and not more than once every couple of years, that is not a concern over the life of a car. Done monthly with a hard compound, it is.

A dual-action polisher working a red panel to remove swirl marks

Book ceramic wax & paint correction

Call or WhatsApp with your car model and we will confirm a slot and a firm price.

Call Now WhatsApp Book a Slot