Services
9H Ceramic Coating in Kota
A hard, glass-like layer bonded to your clear coat. Two years of gloss, easy washing and protection from Kota dust.
| Service | HatchbackSwift, i20, Baleno, Tiago | Sedan / MUVCity, Verna, Dzire, Ertiga | SUV / PremiumCreta, XUV700, Fortuner, Harrier |
|---|---|---|---|
| 9H Ceramic Coatingincludes 2 maintenance washes | ₹15,000 | ₹18,000 | ₹21,000 |
All prices in Indian Rupees, inclusive of materials. Final quote confirmed after we inspect the paint.
What a 9H ceramic coating actually does
A ceramic coating is a liquid polymer that cures into a thin, hard, transparent layer chemically bonded to your clear coat. It does not change the colour. What it changes is the surface: it becomes slicker, so dust and tar have less to grip; it becomes water-repellent, so rinse water leaves in sheets instead of drying into rings; and it becomes chemically resistant, so bird droppings and acidic rain have a harder time etching through to the paint underneath. The "9H" refers to pencil hardness — a scratch-resistance scale, not a guarantee against stone chips.
Why Kota is harder on paint than most Indian cities
Kota is a CPCB-designated non-attainment city for air quality. Its monitored PM10 has run between 97 and 153 micrograms per cubic metre across recent years, against an annual standard of 60. The important part for paint is not the number itself but its composition: the gap between the PM10 and PM2.5 figures points to coarse crustal and road dust — limestone from the Ramganjmandi quarrying belt, fly ash from the thermal plant at Nanta, fertiliser and rayon plant fallout. Coarse dust is abrasive. Every time it is wiped across a panel with a dry cloth it leaves fine scratches, which is what swirl marks are. A coating does not stop dust landing, but a slicker surface releases it during a pre-rinse instead of holding it against the paint while you wash.
Heat, UV and the clear coat
May in Kota averages a daily maximum of 42.6 degrees, and the all-time record is 48.5. The UV index sits in the extreme band, above 11, from roughly April through August. Ultraviolet light is what breaks down the resin in a clear coat; heat accelerates it. The visible result is chalky, faded paint on horizontal panels — the bonnet and roof go first, because they take the most direct sun. A ceramic layer sits above the clear coat and absorbs that exposure instead. It is a sacrificial layer, which is exactly why it is worth renewing.
What two years of warranty means in practice
Our 9H coating is warranted up to two years and includes two maintenance washes. That warranty covers the coating doing its job — staying bonded, staying hydrophobic, resisting chemical etching. It does not cover stone chips, kerbing, or damage from an automatic brush wash, which will cut any coating. The maintenance washes are not a courtesy; they are how we inspect the layer, decontaminate it and top it where it has thinned. Owners who skip them are usually the ones who find the beading gone at eighteen months.
What is included
- Full decontamination wash, iron fallout removal and tar removal
- Clay bar treatment across every painted panel
- Machine paint correction — compounding and refining
- Panel wipe to strip polishing oils before coating
- Two layers of 9H ceramic — main coat and top coat
- Infrared-assisted cure and overnight rest
- Two maintenance washes inside the warranty period
Watch the process
9H Ceramic Coating — questions
How much does ceramic coating cost in Kota?
At The Detailers, 9H ceramic coating starts at ₹15,000 for a hatchback, ₹18,000 for a sedan or MUV and ₹21,000 for an SUV or premium car. That figure includes the decontamination and paint correction beforehand and two maintenance washes afterwards. A car whose paint needs heavy correction first may need the ceramic wax stage quoted separately.
How long does ceramic coating last?
Our 9H coating is warranted up to two years, and the 10H up to five. Real-world life depends on how the car is washed and where it is parked. A car parked under cover in Talwandi and hand-washed will outlast an identical car parked outdoors near the industrial belt and run through a brush wash.
Is ceramic coating worth it for an Indian city like Kota?
It is worth it if your objection is dust, water spots, fading and washing effort. It is not worth it if your objection is stone chips — that is what paint protection film is for. In Kota specifically the dust argument is strong, because monitored PM10 runs well above the annual standard and much of it is coarse, abrasive road and quarry dust.
Can ceramic coating be applied to an older car?
Yes, and it often makes a bigger visual difference than on a new car. The catch is that the paint has to be corrected first. A coating locks in whatever is underneath it, so if the swirl marks are not polished out beforehand they are sealed in for the life of the coating.
What is the difference between ceramic coating and Teflon coating?
Teflon, or PTFE, is a wax-class sealant that sits on the paint and lasts a few months. A ceramic coating forms a semi-permanent bond with the clear coat and is measured in years. Teflon is cheaper per application; ceramic is cheaper per year and considerably harder.
Do I still have to wash the car?
Yes. A coating makes washing faster and safer, not unnecessary. Dust still lands. The difference is that it releases during the rinse instead of needing to be rubbed off, which is what protects the paint from swirl marks.
Related services
Glass Treatment
All glass decontaminated, polished and sealed. Wipers stop juddering and night glare drops noticeably.
Starting at₹1,700 View service
Full Car Detailing
Interior and exterior together — decontamination, correction, interior deep clean and a protective layer on top.
Starting at₹4,000 View service
Paint Protection Film (PPF)
A clear, self-healing film that takes the stone chips instead of your paint. Priced by the square foot, so you cover only what you want.
Price₹650 /sq ft View serviceServing your area
We take this work from anywhere in Kota and up to 120 km out.